PGRemote-CSI/DSI

- MIPI CSI/DSI signal generation support on the PG3A is provided via "PGRemote".
- "PGRemote" is an application-specific interface to the PG3A that makes signal generation for MIPI signals a simple pushbutton operation.
- Single commands with user fields, macros, user-defined commands, video, looping video operations, scripting, full remote control are all supported.
- Video is imported via .bmp files.
- Supports MIPI-specific P332 PG probe
- Supports new DSI Optional formats in 1.0.2 of the MIPI spec
- Download and testdrive PGRemote at the link below:
Link to the MIPI software download page:

PGRemote Users Manual v1.23 - Jan 2012
List price: $2,750.00

DPhyPre
MIPI DPhy Preprocessor for Tektronix Logic Analyzer

--- No other solution supports these features ! ! !
- Supports MIPI signaling at up to 1.5 Gbps per lane.
- Supports up to 4 lanes
- Extensive real-time triggering and filtering and error detection
- Auto timing optimizer for less-than-perfect DUTs
- powerful disassembler; view protocol at many levels
DPhyPre Datasheet and Users Manual V1.2 - February 2012
DPhyPre Control GUI Users Manual V1.2 - August 2011
DPhyPre Control GUI V1.8 - November 2011
This can be run in off-line mode so you can get a feel for the features and functions.
DPhyPre Disassembler (by Tektronix) V1.1.025 - October 2011
You will need TLAApp from Tektronix and the RefMem from below to do anything useful.
A TLA capture from DPhyPre with video and error for use with disassembler above

The DPhyPre is available only through your Tektronix distributor.

DPhyTx
Real-time Transmitter Phy card

- This is a HAPS-based Phy (adapter to FMC available).
- It supports up to 4 data lanes and two clock lanes at up to 1.5 Gbps/lane.
- FMC support FPGA code (for Xilinx ML605) available from Northwest Logic

DPhyTx Datasheet - February 2012
List price: $2,500.00

DPhyTx HAPS pinout schematic

DPhyRx
Real-time Receiver Phy card

- This is an FMC-based Phy (adapter to HAPS available).
- It supports up to 4 data lanes and two clock lanes at up to 1.2 Gbps/lane.
- FMC support FPGA code (for Xilinx ML605) available from Northwest Logic

DPhyRx Datasheet - Jan 2012
List price: $2,500.00

DPhyRx FMC pinout schematic

DPhy-P6980
DSI and CSI to Tektronix P6980 Probe Adapter

- This adapter connects to a MIPI link for monitoring on a logic analyzer.
- It separates the Low Power signals from the High Speed signals.
- It supports up to 4 data lanes and a clock lane at up to 1 Gbps/lane.
- The probe tips are solder-in for maximum flexibility.
- Tek is no longer supporting this probe so it is not recommended for new customers

Probe Adapter Datasheet - March 2009
List price: $5,000.00

Note to Aerospace companies: This product is produced on a lead-free assembly line using lead-free solders.
For more information, contact us directly.

This page last updated February 14, 2012